Instructor: Daniel A. Steck
Office: 277 Willamette Phone: 3465313 email: dsteck@uoregon.edu
Office hours: walkin and by appointment
Teaching Assistants:
Erik Keever  office: WIL 441  office hour: TBA  email: ekeever1@uoregon.edu  
Sudarshan Karki  office: WIL 315  office hour: Th 11a12p  email: skarki@uoregon.edu 
Schedule: TTh 12:001:20, 318 Willamette, plus a 3hour lab section (11 WIL)
Course reference number: 34963
Credits: 4
Prerequisites: PHYS 203 or equivalent; MATH 253; contact me if you have not taken PHYS 431
Links: news, lab sections, textbook, course notes, labs/homework sets and keys.
As a scientist, your goals in studying electronics are somewhat different than, say, an electrical engineer studying the same subject. Without delving into too much of the details of how electronic components work, you need to have simple conceptual models that will allow you to understand schematics well enough to troubleshoot a misbehaving instrument, design a simple circuit to filter a signal, or track down and eliminate noise in a lab measurement. Basically, things that will help you do physics in the laboratory. We will study digital electronic components and circuits at this basic level, from basic logic gates to interfacing analog and digital circuits to basic microprocessor operation. We will also cover some of the more “realistic” features of digital components that you need to understand to design and work with more precise circuits, as well as the tricks and techniques you need to make circuits work.
See the tentative syllabus below for a preliminary list of topics we will cover.
Lab: The whole point of electronics is to put theory to work and make (working!) electronic circuits. Thus, the lab component of the course is critical. The goal of the labs is to give you a functional knowledge of electronics and to get you comfortable working with electronic devices.
You will need to attend one 3hour lab component most weeks (see syllabus below for schedule). There will be multiple lab sections, and we will arrange these during the first week of class.
You should also obtain a laboratory notebook (i.e., as you would use in a real laboratory), permanently bound with quadruled pages (like this). This is the primary record of your lab work, and you should record all your notes and measurements in this book.
Texts: There is no required textbook to purchase for this course. The main reference for this course will be online notes posted here. Another good, free reference is a set of notes by Ray Frey, posted here.
There are a few books that are good introductions to electronics, and you might consider picking up one or more of these:
Grades for the course will be based on homework, two midterm exams, and a final exam. The relative weights will be as follows:
Homework: will be assigned weekly and each assignment will be due in class one week after it is assigned. Thereafter, late homework will be accepted, but at a 25% penalty for each 24 hour period it is turned in late. Partial assignments may be turned in, and only the late portion will be penalized.
Midterm exam 1: in class, Thursday, April 21.
Midterm exam 2: in class, Thursday, May 19.
Final exam: The final exam will be held Tuesday, June 7, 8:0010:00 am, in 318 Willamette.
Labs: There are 7 total lab projects. For each lab, you should turn in a brief report on your work. This is not the same as what you record in your lab notebook. The report should summarize the work you did in the lab. Provide headings for your entries that correspond to the sections in the lab instructions. Clearly indicate the location of required material in your report. Note any unusual or unexpected results. You should turn in your reports in the box in room 11 at least 48 hours before your next lab meeting.
Pass/fail grading option: a passing grade requires the equivalent of a C grade on all coursework (homework, labs, and exams).
Tuesday  Thursday  Lab 

29 March Binary and Logic Gates 
31 March Boolean Algebra 

5 April Karnaugh Maps 
7 April Implementing Logic Gates 
Lab 1 Binary Numbers and Logic 
12 April Multiplexers 
14 April FlipFlops 
Lab 2 Decoding, Multiplexing, and Sequencing 
19 April Counters/Registers 
21 April Midterm Exam 1 

26 April State Machines 
28 April Comparators 
Lab 3 FlipFlops 
3 May 555 Oscillators 
5 May DigitaltoAnalog Conversion 
Lab 4 DigitaltoAnalog Conversion 
10 May AnalogtoDigital Conversion 
12 May Monostable Multivibrators 
Lab 5 AnalogtoDigital Conversion 
17 May PhaseLocked Loop 
19 May Midterm Exam 2 

24 May No Class: Memorial Day 
26 May Memory 
Lab 6 PhaseLocked Loop 
31 May State Machines with Memory 
2 June Circuit Fabrication 
Lab 7 Circuit Fabrication 
Other important dates:
Last day to drop without a W: 4 April
Last day to register: 6 April
Last day to withdraw: 15 May